On Jun 5, 2:03*am, benson...@yahoo.com.hk wrote: What does the interface on the other device look like? Are there error logs on that device? Can you do a show run int gig 0/21 for me also.

On Jun 2, 3:04*pm, Trendkill <jpma...@gmail.com> wrote: Yes, it's been working smoothly now for about tw o days. Thanks again for all your help! Mickie

Hi I have an old DG814 on which I suspect the port forwarding has packed up. It always took ages to update the display anyway - days sometimes - though the settings *were* shown in the backup...

"AxJ" <nomail@mail.net> wrote in message news:8qGdnR50hcUg-NrVnZ2dnUVZ_gidnZ2d@comcast.com... If you are not running a routing protocol such as BGP between your ISPs, you can creat 3 static/default...

Does anyone know the default timer for the ICMP SLA tracking statement. I have looked at the IP SLA guide for ICMP and I can't work out how often the ICMP requests are sent. I know I can set the...

I've set up two wireless desktop PC's to connect to my AP1242AG access point, and from another (wired) machine I can see them on the LAN and share their files. But when I use mac address filters on...

http://www.linuxhomenetworking.com/cisco-hn/dsl-router.htm giligan wrote:

I want to get a high gain directional wlan antenna and I was thinking about a Cisco AIR-ANT3338 solid dish - they're pricey but I trust I'll get excellence from Cisco. I've also seen these parabolic...

I am generally very satisfied with my NETGEAR DG834GB ADSL Modem / Router - (hardware revision v3) I use it on an 16 mbits / 1 mbits ADSL line and i have 2 computers connected to it via Ethernet, and...

On Jun 4, 7:33 pm, alexd <troffa...@hotmail.com> wrote: Hi, The output I receive when doing an snmpwalk is vlaid and with no errors. I receive the above errors when polling the device after...

I try to remove crypto map sequence 10 from ASA no crypto map outside_map 10 peer no crypto map outside_map 10 transform-set clear crypto ipsec sa map crypto_map clear crypto isakmp sa clear crypto...

Thank you for the detailed explanation. This solution is what I need.... rgds dennis On 3 Jun., 17:52, "jseem...@gmail.com" <jseem...@gmail.com> wrote:

I have a Cisco ASA 5505 with security plus licensing, an Exchange Server and internet connections. Here is what I need. The "outside" interface is connected to my DSL modem and has an IP address of...

On Jun 3, 4:16*pm, jcle <jmspr...@hotmail.com> wrote: If these are static routes or loopbacks, then yes they will show separately from the overall /24. Particularly if these are loopbacks, you want...

In article <ryg1k.2526$ZE5.2499@nlpi061.nbdc.sbc.com>, Charles N Wyble <charles@thewybles.com> wrote: I don't think that's right. "ip default-gateway" is used when the box isn't being a router:...

http://www.speedtouch.nl/ -- --------------------------------- --- -- - Posted with NewsLeecher v3.9 Final Web @ http://www.newsleecher.com/?usenet ------------------- ----- ---- -- -

Scott wrote: Run appliance in proxy mode (you will need to update browsers with proxy settings and lock it - easy job if you're running windows domain) Wieslaw

On Tue, 03 Jun 2008 16:01:33 +0100, Sam Wilson <Sam.Wilson@ed.ac.uk> wrote: Sam, Precicely the answer - thanks. I did do a lot of googling prior to posting this message, and found nothing. After...

Charles N Wyble wrote: There are 2 wonderful options available on PIX/ASA for traffic analysis. First is (surprise! :-) tcpdump. See "capture" command for more details. Second one is...

On Tue, 03 Jun 2008 16:26:30 +0200, Markus Marquardt <adrock0801@alice-dsl.net> wrote: This is more Deutsche Telekom related not country related. In Croatia we also have Annex B over ISDN or...