We seem to be having a problem reverse telnetting into our digital modems on an ACS 5350. They are setup on lines 1/00 through 1/59, configured with the following: line 1/00 1/59 exec-timeout 1...

I have a 3620 running 12.1(2)T IP-Plus. In my startup-config I have: interface FastEthernet0/0 ip address 65.xx.yy.33 255.255.255.224 secondary ip address 65.xx.zz.249 255.255.255.252 secondary ip...

I have some raw ethernet devices that needs to be interconnected to eachothers. I use a catalyst 2950 switch to interconnect them. Since I use the multicast "routing" feature of the switch (device A...

Hi, we've updated our catalyst 2950 and 3524/48 with the latest firmware. We use cisco ACS for telnet authentication, so aaa tacacs+ is enabled. For http login we use the standard login with the...

I'm writing an Windows application using multicast. This application works with my win2k software router. But my customer with Cisco 1000 (not sure exact model) reported that my application doesn't...

Due to the number of postings on the above subject, following is a working config of an 827 configured to terminate an IPSec tunnel from the internet. The ISP is only required to assign a dynamic IP ...

I want to monitor secure port using CSS ? Is it possible to configure CSS to monitor port 443, if yes HOW ? I want to check health of secure port and if is down want to take server out of...

Hello. I have a problem enabling 802.1x authentication. I have a 3750 switch. I enabled 802.1x authentication over a port on which a client is attached. this is my configuration: aaa new-model aaa...

Hello everybody, I'm searching to nat the port 25 on the diealer0 to the one of my lan smtp server, but unfortunately it doesn't work at all :( The strange thing is that all the others forwards work...

Hi, I'm trying to download from PIX Firewall configuration file to the TFTP server. So I used: write net :<filename> I have created <filename> on the TFTP server (I read about some problems with...

Hello, I have a problem with dial-in user on cisco 3640. I would appreciate if someone can help me. When I try to connect from my PC (Windows 2000) with username, password and CHAP autentification I...

I tried to connect two location using two 1721 CISCO routers and two ISDN lines. This is the configuration that doesn't work and I am without ideas. Can you help me please to troubleshoot this ISDN...

Greetings, With this kind of a setup do I need to do the Null0 routing? We have lines through both Qwest and Sprint and only seem to experience looping issues on the Qwest lines. ip classless ip...

Hi, Just want a bit of advice how best to go about this one. I want to buld a VPN with one head office and 3 branch offices, with a PPTP connection for me to the head office that I can use to then...

Can anyone advise what the number is appended to the end of the listed boot image below. On some devices I see just a 1 others a 12. I have listed an example of ,12 and ,1. BOOT variable =...

I need some help. My router will not redial no matter what I do. When i hard reboot or soft reboot it will connect with my isp in a matter of seconds. After that it will time out when I don't use it...

In article <523g10douiimtgrjgeeajc4adjh3ce20t9@4ax.com>, nobody@nowhere.invalid says... No it is not. You can look at the reseller spreadsheet if you have access. If not, search CDW.COM. They...

One vendor quoted support category level 2 and another cat 3. One vendor said the Category depends on how it is configured (which I think is true for module devices or maybe a device which has very...

Hi ng, what would be the cheapest switch & router that supports : - 48 lan ports + vlan - vlan trunking + adsl Thx - Thomas -

Is it possible to configure a NAT H323 on a router CISCO 2600 (IOS 12.3)? On my system, the call is established but the RTP information is received in one direction only. CISCO says that the NAT...