On Jun 3, 3:17 am, Charles N Wyble <char...@thewybles.com> wrote: A subinterface will not help this situation. A subint only divides the networks that can be accessible on the physical interface,...

Darryl, You don't need reverse proxy for that. You just need a router with a slightly more capable firewall. A standard Cisco or netgear router will do this. You need Access Lists that control what...

Trendkill wrote: Some possibilities: root@charles-laptop:~# apt-cache search netflow flow-tools - collects and processes NetFlow data flow-tools-dev - development files for flow-tools fprobe -...

Trendkill wrote: Yeah definitely use the CLI. The vast majority of the community information and the stuff straight from cisco is all documented as CLI commands. It's a nice way to concisely...

Merv wrote: Interesting link. One thing that jumps out at me is: Repeater access points do not support wireless domain services (WDS). Do not configure a repeater access point as a WDS candidate,...

Edwin wrote: So I know that with IPTABLES you can do things like reject access after certain connection attempts in a specific time frame from the same IP or any other combination you can dream up....

What feature packs? What version? class-map ? works for me. Cisco 1841 running Cisco IOS Software, 1841 Software (C1841-IPBASE-M), Version 12.3(8)T4, RELEASE SOFTWARE...

Wow a couple DSL threads today. :) I also would recommend the 1800 series. I'm using it at home (just a few systems connected) but it has all the functionality I need. Using a cisco 1841. No...

Hello, Dan! You wrote on Mon, 2 Jun 2008 10:58:06 -0400: DM> Followed DocID 41940 to the letter. also reviewed 43068. I'm sure DM> I'm missing something simple like a proper access list...

On Mon, 02 Jun 2008 20:17:50 GMT, pantip <jollywood@planet.nl> wrote: What's a Speedtouch? (Post a URL to the manufacturer's site if you can).

On Jun 2, 12:35 pm, Lester Lane <ja...@ppm-investments.co.uk> wrote: SSH is much more secure, so if there is any access to this device from externally, you will want to use this. Optimally, you...

it seems easier... 192.168.1.0/24-sw2----Router1-----Router2----------sw2-192.168.1.0/24 ! hostname Router1 ! interface Loopback0 ip address 10.200.254.1 255.255.255.255 ! pseudowire-class one

On Jun 1, 9:46 pm, Charles N Wyble <char...@thewybles.com> wrote: Yep, the next step -thanks.

On May 30, 6:09*pm, Aaron Leonard <Aa...@Cisco.COM> wrote: I would like to be sure that quality of service is always good enough. I just wonder if it's a real issue. Users never report any...

You might also consider the link between the 6513s, and configure it as a layer 2 Etherchannel with GLBP. You'll benefit from a more fault-tolerant switch configuration without the klunkiness of HSRP...

Not sure how or why everything is configured on a new network I am working on. Our network is X.X.X.X with a gateway X.X.X.2 that is a router connected to the internet. There is one point to point...

Check the logs on the SUN box. You didnt specify how the vista client was connecting but you need to make sure the correct connection protocols allowed on the SUN box. IE: CHAP, MSCHAP, PAP "John...

What do you mean by "it's too expensive to get dynamic routing running inside the MPLS"? I have never run into any carrier that charges extra fees for routing, because without routing MPLS is...

thanks i have some thing to look at next week -- --------------------------------- --- -- - Posted with NewsLeecher v3.9 Final Web @ http://www.newsleecher.com/?usenet ------------------- -----...

On Fri, 30 May 2008 12:28:59 -0700, Trendkill <jpmason@gmail.com> wrote: I did a wr mem, but did not reboot, that explains it. Thanks for the help. -- PL/I for OpenVMS www.kednos.com