upgraded 3620 with an 8 modem card from 12.0(7)XK2 to 12.2(17a). Test dialing with DUN profile. 2d02h: As2 IPCP: I CONFREQ id 1 len 40 2d02h: As2 IPCP: CompressType VJ 15 slots CompressSlotID...

Have you tried this ? http://www.cisco.com/warp/public/474/pswdrec_800.html Rood "Delphi" <ik@nospam.demon.nl> wrote in message news:vhnbuhnp5agg0c@corp.supernews.com...

The errors are occurring on both NICs, in nearly equal distribution. Cables and switch are known good. The only thing new are the NICs. Surely a hardware problem (of any kind) would manifest itself...

On Tue, 22 Jul 2003 00:34:57 +0000, Walter Roberson wrote: it will ARP for the address, so the local router will need to proxy arp for the non-local address. pix supports RIPv2 since 5.1

Hi, I'm using SecureACS 2.3.6.2 as my TACACS+ authentication server (combined with RSA/ACE Server 5.1) for telnet/ssh management sessions to our Cisco network devices (IOS-based switches and...

Last night I had the gateway router take over the IP address for one of my servers. I identified the router as the problem when I started a server reboot and was still able to ping the IP address....

anyone know about how long it takes them to respond to an email requesting an upgrade with all the info they requested on the site? is there a way to speed them up? -- The complexity of a weapon is...

what is bidirectional NAT ? Internal -----NAT ----------- NAT ------- Internal Network A device device Network B hosts in Network A should be able to connect to hosts in Network...

Hi Dave, I guess your looking to get non-VXR units off Ebay, eh? Probably just due to cost, right? Anyway, the problem isn't the hardware the Linux boxes are running on, the problem is the network...

New to Cisco, but not new to routing/networking. My co. has 2 2610 w/dual T1 cards they want connected to our ISP. First, I need to know how to access the routers. The Ethernet port seems to have no...

I have a user that complained of slow connectivity/download and when I checked the port status, he had CRC errors. I then found that the user also has a Netgear hub his PC is attached to. Would I...

Greetings all, 1. Is it possible to transfer a selected incoming POTS call to another POTS destination and avoid Tromboning, i.e. not allocate two call ports after the transfer is completed? 2....

Set up the scenario a little here: We have a /23 network coming in through a Cisco router. At the moment, our Linux box is using proxy arp and has the network divided into two pieces. I want to...

I am installing a CAT 4506 with 5 - 48 port 10/100/1000 blades. In normal installations we wire patch panels back to back. With this configuration we terminate clients into the RJ45 connectors on...

According to net-snmp.org it should be easy to handle traps. Logging traps works fine. But I stuck with traphandling: I added: traphandle default /bin/sh...

As the name "ROM" (Read-Only Memory) implies, there is no software mechanism capable of the upgrade. You'll need to call Cisco TAC to order part number 2500-BOOT=. Here's a complete set of...

In article <TnuSa.4220$Df6.250@news-binary.blueyonder.co.uk>, hOwLa <support@howla.co.uk> wrote: :Brand new boxed Cisco Pix 501 - 3DES - 10 User, cables, CDs, manuals. Note: Cisco IOS and PIX...

Hi all Someone out there may know this. Is is possible to copy the IOS from one cisco 2924 to another via a network? Also do the 2924 switches need to be exactly the same? The ones here are 2924M-XL...

In article <5ac32eb7.0307210512.aa7cc0a@posting.google.com>, Eric Goldsmith <egoldsmith@columbus.rr.com> wrote: :Just set up FEC (two 100Mbps, full-duplex links) between a server with :two Intel Pro...

"hOwLa" <support@howla.co.uk> wrote in message news:TnuSa.4220$Df6.250@news-binary.blueyonder.co.uk...