I have a PIX 515E with 3 NICs. I am not a "Cisco guy" so my experience is somewhat limited. I have worked with other similar products from other vendors. I will be using the PIX to provide VPN...

In article <4683c042$0$30612$4c368faf@roadrunner.com>, Holz <none@none.com> wrote: And if you have more than one or two, I'd add a VPN. (Yeah, I know that with RWW part of the point is that you...

On Wed, 27 Jun 2007 08:15:00 -0700, pdyne wrote: Yep. As long as the NAT ACL deosn't match 1.1.1.1, you should be good to go. -- Rgds, Martin

On Jun 28, 6:33 am, Christophe Fillot <c...@utc.fr> wrote: Furthermore, if it owns either A) both the receiving and destination network, or B) the receiving network and a next-hop network...

Hi all, On a PIX-515 running v7.2(1) a continuous large amount of packets are beeing dropped because of exceeding the embryonic counter limit currently set to 500. Although lot's of connections are...

Hi guys We've recently rolled out VPN access to our home users who have installed VPN Client V4.8 onto their home PC's We've taken 2 calls to our helpdesk from staff using Windows XP and the Cisco...

Is is not as difficult as it may seem. post your configs without passwords. along without the output of show ip proto show ip route show ip traffic

~ We have a 4402 controller using WPA 1 TKIP & 2 AES, and we are getting ~ MIC Error counter measures on all AP's with clients connected. ~ ~ Most clients are Intel, but I have tested with my Cisco...

"FredJ" <fjumayao@gmail.com> wrote in message news:1182895086.037015.311750@w5g2000hsg.googlegroups.com... You can if the switches are set up in the right way. somone suggesting creating it...

Peter Simons wrote: While that may be the case you are not applying that ACL to your no nat statement: nat (inside) 0 access-list inside_nat0_outbound so the only ACL being excluded from NAT is...

On Jun 27, 3:06 pm, Doug McIntyre <mer...@geeks.org> wrote: Wow. I can't believe it was that easy. Thanks Doug!

ÕæÑ ãÊäæÚå Ýì ÚÇáã ÇáÝÜä ãä ÇÎÊíÇÑì( ãæÓæÚå) http://www.adbtop.com/vb/showthread.php?t=2514 Çæ ãä åäÇ http://www.adbtop.com/vb

docpatelsf@gmail.com wrote: The ACL's are read from top to bottom, you have explicit deny ACL That ACL is being read by the firewall before

Hi All ... Hope You could help .. I can´t establish a SSH2 remote connection to the Public IP addres 200.56.252.238. I am using a NAT Static rule in my 1841 Cisco Router. .. Is there any...

<njwhitworth@gmail.com> wrote in message news:1182959465.529874.317890@e16g2000pri.googlegroups.com... It only does dot1q. The command is not needed.

X-No-Archive: yes Hi Have a site to site VP N problem The network servers are Microsoft windows server both 200 and 2003. AT one remote site using an ASA to ASA VPN clients could pick up email from...

Hi all, Ran into a problem with PIX 7.1(2)53 on a PIX 515. All of a sudden our external services (FTP, HTTPS) are not passing through. I don't see anything like that in the caveats, but maybe I'm...

Nyerere wrote: Local DNS, create a forward zone called company.co.za inside that zone create an A record for server1 that points to 172.16.1.33.2 ? Not sure that IP is correct. Make sure that your...

Anyone have luck with the new GNS-3 dynamips front end? It's in alpha release, but looks very promising. I will be following the development of this closely. Check out...

On 27 jun, 05:41, Sam Wilson <Sam.Wil...@ed.ac.uk> wrote: Paul, Here follow a simple example of a expect script. It only logs into the router and then give the prompt back to the user (that is what...