our ISP that owns backbone will provide us two separately 100 Mbps committed links with the same class C network. we are going to host multiple websites behind two ASA 5520 devices for redundancy....

see Cisco T1 troubeshooting doc http://cco.cisco.com/en/US/tech/tk713/tk628/technologies_tech_note09186a00800a5f40.shtml .. is the T1 being properly clocked ? .. which device is providing the...

We have a campus LAN with a Cat 6006 with MSFC providing layer 3 routing for approximately 12 VLANs, and about 40 edge switches, mostly 2900XL and 3500XLs for client access. Most of the ports on the...

We have a campus LAN with a Cat 6006 with MSFC providing layer 3 routing for approximately 12 VLANs, and about 40 edge switches, mostly 2900XL and 3500XLs for client access. Most of the ports on the...

Thank you to everyone for making the first quarter of 2007 a great successl for Network Liquidators. We have completed the merger of 1 Nation Technology and have integrated all information...

Does anyone know of a Router with at least 4 nodes where you can turn OFF the firewall, OR DMZ all 4 nodes? TIA Tony

"Pseto" <pseto@bark-bark.dog> wrote in message news:euglhp$o69$1@ss408.t-com.hr... I found it: 1.3.6.1.4.1.9.9.109.1.1.1.1.3.1 and it works;) Igor

In article <1175291023.296409.151890@b75g2000hsg.googlegroups.com>, Truck <trucknguyen@gmail.com> wrote: Five. Six if you include the electrified carp trick.

Hi group, did anyone have experience with the usb ports on a sup32 ? I would like to boot the first time from an usb stick...to see if all working is fine... Is this possible ? thx

On 29 Mrz., 16:18, "J.Cottingim" <jcottin...@yahoo.com> wrote: sorry, I can't give an output because the router is at the moment not active and is standing in our customers basement...;-)) but at...

On 30 Mar, 09:51, humbaba <m...@co.ltd> wrote: I suspect (strongly) that physical routed ports are not supported for SSO (Stateful Switch Over). There may I suppose be some QoS differences in the...

In the spring, I love standing in a storm cascade with no shoes on....

On Mar 30, 10:21 am, "Mysticmoose06" <AaronMSo...@gmail.com> wrote: Policy routing is what i think i need, but I'm also wondering if i already have enough setup, but the router at the other end(...

On Mar 30, 7:44 am, "ciscosec" <reachke...@gmail.com> wrote: We do the same thing at where I work. All we do is block www traffic by all hosts except the proxy server. Then for configuring, we put...

On Mar 30, 7:47 am, "ciscosec" <reachke...@gmail.com> wrote: Thanks so much for the advice. I appreciate it greatly.

On 28 Mar, 13:50, AM <a...@am.am> wrote: ok, thanks all, i solved adding a nat from lan ip to dmz ip! thanks again Marco Arfini

Colin Heseltine wrote: Neither am I but this might help, if you haven't already read it. <http://www.cisco.com/en/US/tech/tk175/tk15/technologies_configuration_example09186a008071a8da.shtml> I'm...

Hello, I am posting this so if anyone else out there runs into this problem it will save them a few hours of looking at ambiguous Cisco documentation. The short answer is this cannot be done on ver...

I would like to point a Cisco Access Registrar to an ipsec router. Kindly guide me how to configure the same in a Cisco Access Registrar.

You may wish to investigate: Play Jerry Bush's brand new: Cisco subnetting game http://www.networkworld.com/community/?q=node/12124 Sincerely, Brad Reese on Cisco Network World Magazine Cisco...