Well, all of the Dlink routers that I have used have a feature whereby you can block all traffic TCP/IP and UDP on a range of ports (1-64000) for certain time ranges on selected days. They also...

Which differences are between Cisco CAR and rate limit that can i apply on Catalyst 3750 ? Thanks!

I'm selling some Cisco WIC 1T's from my lab. Bidding starts at a penny. Buy from experienced networker. Great for lab, or production! Good...

Hi Morph, I overlooked the np70.bin part, i started rightaway with the 724.bin file... Thanks, now it's working ! Many thanks again !

Elia Spadoni wrote: The additional info was helpful, however you didn't clarify which interfaces on the 2650 are being used for NAT. Presumably, atm0/0.1 is your outside NAT interface. Are both F0/0...

I currently have a Cisco 2500 series router that supports a serial (sna/sdlc) connection on a point to point circuit. My customer has requested that the current circuit be removed and the traffic be...

Dizum.com has divulged information regarding the routing you take to use their service to "anonymize" your postings. It has been passed to the FBI regarding a civil rights abuse case, and defamation...

ipv6 -------------------------------------------------- All your IPV6 are belong to me -------------------------------------------------- -- --------------------------------- --- -- - Posted with...

Hello, I don't want to get it complicated.. I just wanted to forward any request from the lan client (from the canonic fast0/0 -> serial0/0 for example) to remote ports 80 and 443 to an IP in my dmz...

The easy vpn documentation shows the command "crypto ctcp port" to enable ipsec over tcp. I added this command on both sides server & client but show crypto ctcp session shows nothing. And the log...

Joe Beasley wrote: I see - and wh not? What's the technical difference? Regards fw

Hi I'd like to buy a wifi(g) router (with at least 4 RJ45) which could hosted my USB Brother MFC 740 (multi function printer fax scanner). I know that some routers have problems with multifunction...

Here the Links for the Latest CISCO Exams (Testking for CCNA-CCNP- CCIE- CCDA-ICND ) Exclusifly In our Group Download it From Here : www.freecisco.on.ma Good Luck For Eeveryone

try setting trunk mode to non-neg int <> switchport switchport trunk encapsulation dot1q switchport mode trunk switchport nonneg after reconfiguring switch port as a nonneg trunk port, post the

On May 2, 12:30 pm, "Martin Bilgrav" <bilgravCUTTHIS...@tiscali.dk> wrote: That config is for the remote ASA which plays the role of a NAT translator only. The VPN client is on the PC. I just got an...

Hi Mike Please can you provide your email address so that some of us can contact you, mine is llinsactive@gmail.com. I have some few questions to post. Thank You,

rg wrote: defined in your vpngroup settings. e.g vpngroup vpn3000 split-tunnel split-tunnel-acl access-list split-tunnel-acl permit ip 192.166.3.0 255.255.255.0 If you then right click on your...

"Phil Begriffenfeldt" <Phil.Begriffenfeldt@specialgreen.com> wrote in message news:eaidnQwIL7Vqi4bVnZ2dnUVZ_rSrnZ2d@visi... yes - hardware forwarding tables will fill with 1 to 2k...

On May 2, 12:39*pm, "Martin Bilgrav" <bilgravCUTTHIS...@tiscali.dk> wrote: Martin - thanks for the reply. I work for an oil company that also owns and operates C-Stores. I had the network configured...

I've been asked to check whether the Telco (BT) has set some ISDN lines as point-to-point or point-to-multipoint. If I plug a 2503 (or 2621 with a BRI S/T WIC) into them, is there part of a debug or...