On Tue, 13 Feb 2007 07:32:53 -0800, r123 wrote: It 'sounds' like your main router, which has suddenly popped it's head into the equation, needs a route to the 172.56.0.0 network and to...

On Wed, 14 Feb 2007 01:44:09 -0800, Andy wrote: Ethernet keepalives I think. No keepalive on the vlan should make them go away. -- Rgds, Martin

Walter Roberson wrote: PIX Device Manager (PDM) versions 3.0(1) , 3.0(2), 4.0(1), and 4.1(1), and IDS Device Manager (IDM) version 5.0(1), are incompatible with Java Plug-in versions 1.4.2_08 and...

You can also do this with a "neighbor x.x.x.x default-originate" command under "router bgp" BGP was designed for the Internet, where there is no default-route. Scott "Paul Thompson"...

"Sam Wilson" <Sam.Wilson@ed.ac.uk> wrote in message news:Sam.Wilson-A259E5.09061713022007@scotsman.ed.ac.uk... You can also purchase a DHCP system that offers redundancy without having to use...

Hello All, Does Cisco have similar product like PEP Link with HA? anyone has experience with PEP link? How good the product is, stability? any comments will be greatly...

For the archives, and since I didn't find anything when I searched for it. I wrote this script to log into our Cisco CSS 11503 and change the weight of each service so that when a machine is in...

Hi, The print server is connected to a Brother HL-1440 with a USB cable, 2 computers on the net, both EP sp2, the printer will print some time (from both computers) most of the time will not, any...

Get a free dynamic I.P. client that will run on your computer in the task bar or on some routers. I use the client from http://www.no-ip.com and it works great. Good luck, Bruce "Bob Fry"...

I have a strange problem with a client: They have Comcast cable internet, and a router inside to route traffic to various servers. The router has a static IP. Recently, Comcast changed their DNS...

Okay I found the answer myself but I thought I'd post it to help anyone out who may also be having trouble with this. Just add the following to the PIX configuration: fixup protocol pptp 1723 I am...

Please don't treat this as spam or advertising - it's not that at all, I feel it may be of legitimate value to this group. I have just posted a tool (qqCDR) on the web - it's an interface to allow...

Hi Jon, ~ Quick question and I may already know the answer. ~ ~ Here is the setup first. ~ We have several Cisco 1200 APs currently with only 1 SSID and an ~ access-list to limit where clients go. ...

"a" <a@mail.com> wrote in message news:iFeAh.961730$5R2.878555@pd7urf3no... You may have used "no access vlan 1" but does that appear in the config? A switchport by default is in vlan 1 but...

Hello all, Do any of you has already done any configurations with CSC (where the customer carrier provides MPLS VPN service) and Pseudo-wires on top of it? At first glance there should be no...

Hi, I have experiensed failover failure on the new instalation of pair of ASA 5510 7.2(2). I use multi context mode but actualy in Active/ Standby mode. Only the reason fro multi context is the...

Hi I have a 7200 series router. Image version: c7200-is-mz.123-6f.bin I want to boot it from tftp. The config register is set to 0x0 and the router is in rommon mode. I use the following...

You may wish to investigate the Cisco Resumes web page for example resumes: http://www.bradreese.com/cisco-resumes.htm Sincerely, Brad Reese http://www.BradReese.Com

We have 1721 cisco router, we will order WIC-1NET and WIC-4ESW install on two WIC slot. I want config WIC-1NET connect to ISP, Local LAN port connect to internal private Network. , another WIC-4ESW...

On Feb 13, 12:49 pm, pwhitl...@carolina.rr.com wrote: Confirmed it does support pre-shared key http://www.cisco.com/en/US/products/hw/routers/ps380/products_data_sheet0900aecd8028a9a9.html Did you...