Hi, I would have a view to display interfaces description in cisco works. How can I do? Thanks Mario

Hi all, I'm setting up a shiny new (to me) PIX 501, and I need it set up as follows: 1. I have 64 usable public IP's 2. I'll need one internal NAT subnet, 192.168.1.0/24, with the router using one...

Hello I have 2 pix firewalls i have vpn site to site i tried so many times do VPN server and nothing works this is my VPN config - what do i have to do ot be able connect to Office via Cisco VPN...

Currently we have a Frame network of six routers with two different ISPs, each at a different site. We have an ASN and three of our internal routers share BGP tables from the two providers. The...

Hi guys, This one has been puzzling me for some time now, and I was hoping for a bit of advice from the experts! Currently we have 4 Cisco 3500XL switches, connected like...

Hello, everyone! I will like to know if this configuration is correct and especially sufficient for a connection ADSL max on a wide-area network. Help me please. Here my conf : ADSL#show conf...

How to see statistics (local pool definition, how many and which IP addresses and so on) about the use of VPNserver in the PIX? Via CLI. TIA Alex.

Hi I looking some free network traffic generator, windows or linux, no matter, to testing my switches bandwith thx for some clue regards edi

For the OSPF routing protocal, one route interface maybe belong to many area, is it right???

Hello! I am here in a local Network 192.168.0.0/24 behind a Linksys WRT54G Router. I now want to host a VmWare Team on my Computer with a seperated Subnet (for example 192.168.100.0/24), having...

I have eight (8) Perle P1700 Series P1730 routers in excellent condition, all recently pulled from a working network. All have been thoroughly tested and restored to factory default settings and...

I am trying to establish a VPN tunnel between 2 PIX 506E's. This is, for now, as straightforward a setup as there could be: private LAN 1 --- PIX 1 ----- internet ----- PIX 2 ----- private LAN...

Use ms-windows VPN client to connect to the outside interface of the PIX via a public, fixed, IP address. (Remote machine is 69.xxx.xxx.xxx, LAN is at 71.xxx.xxx.xxx). Once the remote machine is...

Hi to everyone! I'm looking for some informations about the possibility to connect a client through a server with an other client!so i'd like to use the server as a re-launching point so that i can...

I have several DSL access routers (7206VXR's) that customers dsl connections terminate on. These routers all have connections back to our core router (also 7206VXR). I'm running EIGRP between the DSL...

Hello People, I have problem with vpn 3020, the error is the following: %CONFIG-4-25: RPT=4: GET post-validation Bad Value Error on alIpLocDefRtPref.0. %CONFIG-5-17: RPT=42: Done writing...

Hi All, lately strange problem occures, i was unable to access (no telnet, no ping) one of our routers that have been running for about 2 years now without problems. After rebooting both router &...

I am using dialer route watch system to trigger isdn backup in case of FR link failure and genneraly it is working ok. But if router is booted and FR link is down then ISDN backup is not trigerred....

UK based role, working from home, on customer sites and from our client's site in Northampton, UK. My client is looking for a Cisco Engineer with experience of Cisco Wireless networking. This is...

Wat is de default Log in voor de setup van deze router? Heb reeds een reset gedaan naar Factory Defaults