When an incoming call is arrived at the FXO interface of a cisco router, I want to get ringing at certain voip extensions. What IOS command could accomplish this? And other than SJPhone, what other...

Is it possible to have the CCS on the same vlan (Vlan 7) as the load balanced cluster? Below is a working copy of the CCS config but the cluster is on a seperate VLAN (Vlan 99). Our oracle db's have...

Does anyone know where I may find a good pix simulator at?

I have my 2 port ISDN BRI VIC connect to telco and local/national call are all working, but international number and emergency number 000 is not working. You will hear "You number is incorrect etc"....

Hi guys. My company recently bought ISA server 2004. I would like to integrate it into my setup with my pix 515 (3 interfaces). What i need the ISA server to do is to publixh a few servers i have on...

Hi all, I have a Linksys BEFW11S4 Version 3 wireless router. It works great--no problems. Will a WRT54G router be any faster on the wireless than the BEFW114 ??? I have 1 wired computer and 3...

Anyone come across a cable with DB15 connector to allow 2 cisco 4700 routers to connect back to back? Regards IMPI

I have an 851 acting as the dhcp server for a small test network. When I force a dhcp renew for a client, the client receives a different IP address. Is this normal behavior? I would have expected to...

Greetings All, I'm using a Windows version of CiscoWorks Resource Manager Essentials 3.5 and I'm having issues adding or deleting new devices using a CSV file to the RME Inventory. What I'm doing...

Hi all, do you know where to find out the IOS image for a 1401 router? TIA, Alex.

We have built a new building next door, and plan on running both buildings on our LAN. We have connected the buildings with a fiber run, and we want to add a fiber GBIC to the 3500 XL at the main...

Hi, I have a Cisco 2514 acting as an Internet gateway in a CCNA study lab setup. I have a Comcast cable modem connect to e1. The 2514 is configured as a DHCP client to get its IP addressing info...

Hello, I'm new to the pix 515e. I want to determine how much memory, software installed, processor, etc. Is there a way or a place that I can go to help a computer literate but virgin to firealls...

Hi There, I have the task of installing a new C3750 switch into an existing ip network. The existing network is just running a basic layer2 switching setup with daisy chained switches. They have a...

Original problem was posted on 20-Dec-2005 under the subject "*some* return traffic not going through vpn tunnel (although not all)". The problem was traced back to a NAT problem where VPN tunnel...

Hi everybody, does someone has a french firmware for the belkin router f5d7633fr4a ?

Hi, I need to determine how much memory is in the pix 515e unit that we bought but our network person has not gotten to install yet. Presently, there are two cards installed and I want to make sure...

We've got a security building that's too far from our main site to use a CAT5 cable link. We've left the guard with a standard analogue phone on the end of a two wire link to an ATA 188. Is there...

Hi, I need to determine how much memory is in the pix 515e unit that we bought but our network person has not gotten to install yet. Presently, there are two cards installed and I want to make sure...

Greetings. In preparing to work on the policy-based routing for the question that was answered earlier today I decided I needed to work out some underlying routing problems first. I'm using my home...