I use a 3com OfficeDirect ADSL router (WINXP Pro). It has the 'usual' four LEDs (Power, Sync, Online, WLAN). The router has been working perfectly for the past 3/4 years. When I shut the machine...

I have two T1 lines from different providers and the requirement is to have the end-users default route be the one ISP and the servers default route the other ISP. Additionally, there needs to be a...

For those following this through an archived Google groups thread, I ended up opening a case with the TAC through the 800 number, and the engineer had to make a special file download for me for ASDM...

Trendkill wrote: I think at the host level you'd have to be careful which virtual network you connected your virtual machine NICs to. With VMWare the default is to bridge to the host NIC, and I...

John, Even though it's possible to run a phones and computers in the same segment, it's not recommended. PCs can generate broadcasts and multicasts, which may screw up your voice traffic. So, it's...

http://www.cisco.com/en/US/solutions/collateral/ns340/ns394/ns302/ns471/net_ implementation_white_paper0900aecd80243f70.html Cool info. On 2/14/08 12:27 PM, in article...

thanks Chad

On 7 Feb, 14:53, Sam Wilson <Sam.Wil...@ed.ac.uk> wrote: Thanks for the considered responses. Well I found out about someone who cares! ip nat pool POOL.source.1 11.28.2.1 11.28.2.1 prefix-length...

If you have a moment, I'd appreciate your help. Please take a look and forward this job on to anyone you think would be interested in the position, or anyone else who could help me find a great...

On Feb 14, 1:34 pm, pfisterfarm <pfisterf...@gmail.com> wrote: When I used to mess with netflow a lot, it wasn't even available on switches, and I think (someone needs to correct me where I am...

I need to enable 'inspect pptp' on my FWSM (3.1). That means modifying our global policy-map which covers other inspects as well. Will that break existing connections through the module or can I do...

Thanks for the info Doug. I will give that a try. Andy On Feb 12, 8:03 pm, Doug McIntyre <mer...@geeks.org> wrote:

On Fri, 1 Feb 2008 14:25:39 -0800 (PST), matthieu.patou@gmail.com wrote: Well, The thing that I can say for Cisco equipment is that you can get a Smartnet contract that will provide support for...

WTB: CISCO WE ARE BUYING USED CISCO EQUIPMENT. We are looking to buy the below Cisco product. We buy used, new or refurb. We also buy other Cisco product as well as Nortel, Lucent, Alcatel and...

WTB: CISCO WE ARE BUYING USED CISCO EQUIPMENT. We are looking to buy the below Cisco product. We buy used, new or refurb. We also buy other Cisco product as well as Nortel, Lucent, Alcatel and...

On 14 Feb, 00:44, Doug McIntyre <mer...@geeks.org> wrote: Really! 6500 sup720 had default of all ports shutdown two years ago. And "no switchport" too IIRC but I may not. Not had a new 4500 to...

You can just ignore this command line. It is, as Walter suggested it might be, for the new Embedded Resource Manager.

Chris wrote: I'm taking the two cources as we speak, and bought a Que Publishing self study guide up front for preparations, which states this for self study: .. at least on 2514 or higher...

http://facebook.com/group.php?gid=2348029702 This is a group for anyone around the world, who is pursuing a career with Cisco Systems, or any other company that utilizes products, services, and...

Intuitive <jason_tomasi@hotmail.com> wrote in news:foumfd$j0f$1@lust.ihug.co.nz: I have the feeling the books were rushed out as there are quite a few spelling mistakes & in one part an incorrect...