Tech Support > Computer Hardware > Routers
Wireless Router Signal Strength
Posted on June 11th, 2008 | 6 Comments

I sent back by wireless router and bought a linksys AP and plugged it into my wired only router and it works a whole lot better charles <arthur.moore@verizon.net> wrote in...

2000 DOLLAR WAITING FOR YOU
Posted on June 11th, 2008 | 0 Comments

2000 DOLLAR WAITING FOR YOU http://earnmoneyathome1.blogspot.com/

need aticle related to troubleshooting ericcson 11-slot tigris
Posted on June 11th, 2008 | 0 Comments

hiii... can anyone send me the article related to troubleshoot the ACC tigris(now Ericcson 11-slot tigris) particularly how it sends the CDR(call details records) to the authentication...

Networking Picture Book
Posted on June 11th, 2008 | 0 Comments

http://ccnahelpguide.blogspot.com

CHAPTER 13 BANKRUPTCY
Posted on June 11th, 2008 | 0 Comments

******************************************** http://chapter13bankruptcy1.blogspot.com

Cisco ASA 5505 causing network down
Posted on June 11th, 2008 | 0 Comments

Hi all, I have done following config on ASA 5505, ASA Version 7.2(3) ! hostname FW1 domain-name STJOHN enable password * encrypted names name 10.6.1.1 GlobalIP !

ipsec vpn between asa5220 and 2811 question
Posted on June 11th, 2008 | 2 Comments

Hello, joey024@aol.com! You wrote on Tue, 10 Jun 2008 17:38:35 -0400: j> I'm looking for a good resource for information on commands related to j> building an ipsec tunnel between one physical fa ...

Using the Linksys WRT54GL as AP
Posted on June 10th, 2008 | 2 Comments

"Don" <don.plotz@comcast.net> wrote in message news:27SdnfwJD4oRatPVnZ2dnUVZ_j2dnZ2d@comcast.com... AP Isolation is disabled by default. I hadn't changed it. Any other suggestions? TIA, Ron

How 2 connect 2 computers via Internet instead of LAN?
Posted on June 10th, 2008 | 1 Comments

Unless your router has a "loopback" feature, the NAT is preventing you from hitting your own external IP address. Loopback basically puts an alias of the external address on the internal interface of...

open firmware
Posted on June 10th, 2008 | 1 Comments

I have an old SMC 7004, which is basically the same as your 704p, with a slightly different case. I looked all over the place and couldn't find any open source firmware for it. Probably just as well,...

Linksys WRT54G password security
Posted on June 10th, 2008 | 2 Comments

The WRT54G with stock firmware is capable of WPA at least. I'm sure OS X is as well. "John" <replyingroup@notemail> wrote in message news:vKadnRg0Epipu7_VnZ2dnUVZ8sKlnZ2d@bt.com...

SSL-VPN
Posted on June 10th, 2008 | 3 Comments

Linksys WRT54GL, reflash with DD-WRT firmware (http://www.dd-wrt.com). Get the v24 VPN build. It contains OpenVPN, an open source SSL VPN solution. Search the Wiki on the site for OpenVPN, it's got...

access-list entry
Posted on June 10th, 2008 | 2 Comments

In article <op.ucjngimvhv4qyg@murphus>, Tom Linden <tom@kednos.company> wrote: Corrupted output of the configuration is often a sign that you are running out of memory. When you show the running...

updating pix 506e?
Posted on June 10th, 2008 | 10 Comments

geekyguy wrote: Again, that is a question for you to answer, I do not believe there is any MAJOR bug within 6.3(3) that was fixed in 6.3(5), but how much is the security of your datacenter and your...

Excellent website for MCSE, CCNA, Oracle, A+ exams
Posted on June 10th, 2008 | 0 Comments

Excellent website for MCSE, CCNA, Oracle, A+ exams http://certadvisor.blogspot.com Good luck to all.

Pix 506E config to tfp server
Posted on June 10th, 2008 | 9 Comments

gxn - the problem was the path with SolarWinds TFTP. You were specifying a folder that did not exist: tftp write '/tftproot/pix- confg'. The Default TFTP Root for the server is default set to...

attaching ipv6 access-list to class-map unsupported ?
Posted on June 10th, 2008 | 0 Comments

on router Cisco 7507 IOS 12.2(25)S5 I created an IPv6 access-list already on router called ABC_12. and When I try to get these commands on router: rot7507-3(config)#class-map...

Management tools for 4400 series
Posted on June 10th, 2008 | 3 Comments

Thrill5 wrote: I did deployments where people were buying WCS for just 2 controllers. If you want to see heatmaps or track some wireless clients - can't do that on controller alone. Andrey.

3750 Series Switches Question
Posted on June 10th, 2008 | 6 Comments

"Doug McIntyre" <merlyn@geeks.org> wrote in message news:484e0d57$0$68531$8046368a@newsreader.iphouse.net... price option. We regularly purchase the 1131AG AP's and we never purchase the power...

A simple question
Posted on June 10th, 2008 | 3 Comments

André Rodier wrote: A few weeks ago Doug McIntyre wrote to me: "Register a CCO account. Purchase Smartnet maintenance for your cisco device. Go to your Profile setting, and Edit your Additional...