On Nov 6, 6:24 am, 1crazyri...@gmail.com wrote: I used my smartnet contract and called Cisco. The tech told me to enable multicast routing on the 4507 and configure PIM on all my vlans (also on the...

"Mike W." <wallmrnospam@gmail.com> wrote in message news:lx5Yi.176018$JD1.60298@fe02.news.easynews.com... Not on the concentrator, but you can decrypt the password in the pcf file which will result...

u can try this !match traffic access-list 101 permit tcp any any eq 110 access-list 101 permit tcp any any eq 25 access-list 101 permit tcp any any eq 80 !classify class-map match-any...

On Nov 6, 4:28 pm, "mcaissie" <mcais...@nospam.sympatico.ca> wrote: Thats what I was afraid of. Thanks for your advice.

Cisco Certifications http://educational-world.blogspot.com/2007/05/cisco-certified-network-associate-ccna.html

Cisco Certifications http://educational-world.blogspot.com/2007/05/cisco-certified-network-associate-ccna.html

On 2 Nov 2007 01:59:22 -0700, Merv <merv.hrabi@rogers.com> wrote: Same behaviour. The customer is able to get the site no problems but gets a time out after trying to log in. As an update to this...

Great websites for IT professionals, http://certdream.googlepages.com & http://securityrules.blogspot.com Good luck and have fun.

TEST104 help you pass any IT exams, including MCSE, MCSA, MCDBA, CCNA, CCNP, ITILF, Citrix, Oracle, Brocade..... All questions are 100% hit rate and up to date. www.test104.com

For https, try modifying access-list 2 to permit the outside addresses being used to access the router See NAT order of...

Gil, I need to rectify myself, it depends on the router your using. Most responses in this group refer to routers for home and small office, however there are some routers that allow for this however...

Wow, now i can ping on the Cisco 877 the Access Point on the other side - a big step :-), but when i try to set the route to the Cisco 877 and i try the ping on the computer to the other AP, nothing...

Hi Again, I have a little issue with my C871 box. I would like to access the routers management console through ssh & https (SDM) from the Internet. At the moment this does not work. I am able to...

Hi Again, I have a little issue with my C871 box. I would like to access the routers management console through ssh & https (SDM) from the Internet. At the moment this does not work. I am able to...

<Bod43@hotmail.co.uk> wrote in message news:1194116452.731710.173380@k79g2000hse.googlegroups.com... Here you go: Building configuration... Current configuration : 13029 bytes !

"Tom Linden" <tom@kednos.company> ha scritto nel messaggio news:op.t1btnuiyhv4qyg@murphus.linden... Hi, You don't have to worry about that value (unless you want to tune this for QoS...

nobrow wrote: Go into Cisco Router Web Setup (CRWS), select Advanced Feature Configuration and make sure you have the router firewall enabled. Its just a radio button that you need to select. ...

Hello, ChrisGW schrieb: or doing something with it or so? others computers adaptor? Have you tried to change it (of course the other computers adaptor would not work in stead of the problematic...

I Have a Linksys Managed Switch and a Cisco router Using SNMP protocol I am trying determine the device is a router or switch and Also which all layers are supported by the device? Following...

lisa swallowz said something like: Your reply indent was off by one for some reason BTW. Here's the problem now. It turns out that Actiontec I have is a Verizon rebranded one which has radically...