On Oct 15, 2:20 pm, "Rob" <r...@hotmail.com> wrote: First place I would start would be the Cisco Unified Communications (version) SRND...

I have been using this computer program for a couple weeks now and i am very pleased with the results so far. its a software fatloss program, if your looking for a diet/weightloss plan i reccomend...

On Oct 14, 3:48 pm, "skidmarks" <aschw...@acm.org> wrote: Most telecom instructions for DSL setup say 'do this or that' and just plain avoid saying what or why is ongoing. Many who...

What is the difference between Cisco 15454-OC48IR1310A and 15454E-S16.1-1? Some pages on the Cisco web site gives these cards the same TAN number (the 800-xxxx) number) so it seems to imply they...

DI-614+ REV. B, did it die on me or ??

"NetWorkMan" <marek.bajor@gmail.com> wrote in message news:1192421038.286473.222480@e9g2000prf.googlegroups.com... Golden rule of OSPF - backbone should not be partitioned, even under...

<thefunnel@aol.com> wrote in message news:1192477282.019795.233170@i38g2000prf.googlegroups.com... The access-group is processed before the NAT , so yes your network group should contain the...

Hi, I'm trying to create a Site to Site VPN tunnel between a Cisco Concentrator and a Juniper Concentrator. The tunnel forms and there are no error messages in the log files but data will only...

On Oct 15, 2:00 pm, "raider.a...@gmail.com" <raider.a...@gmail.com> wrote: Nevermind. Vendor sent a card for a different rotuer model.

On Thu, 20 Sep 2007 14:29:50 -0700, Kyniu <kyniu_usun_to_@poczta.gazeta.pl> wrote: Could use some help here. I want to transfer Directory of flash:/ 1 -rw- 16178820 <no...

DarthOdor, Thanks for the reply. I'm still having this problem... My Fe4 port IS my WAN port. Fe0-Fe3 are the internal ports. There isn't a DSL card in this model. I'm using the DSL modem...

Hi there ! Picking up an older thread. I still have some questions concerning DNS. Finally, I succeeded in configuring a router as a DNS proxy with ip name-server A B ip dns server ip...

On Oct 13, 5:15 pm, Doug McIntyre <mer...@geeks.org> wrote: The current topology is Network 1 I have 60 machines they get get IPs from a DHCP 192.168.0.x they all connect to 2 48 port cisco switch...

On Oct 14, 2:46 am, "AFRO" <afropuff103NOS...@hotmail.com> wrote: The current topology is Network 1 I have 60 machines they get get IPs from a DHCP 192.168.0.x they all connect to 2 48 port cisco...

"sherwindu" <sherwindu@comcast.net> wrote in message news:4712F504.97A01192@comcast.net... seem to have answered yuor own question, if it works without the router, then the router is at fault.

Where do I start? We had two Pix 501's attached via dual network cards to two servers which worked fine (one used Proxy software for internet access, the other for accessing our mail box on out...

G. Verhoef wrote: does it reply? A network drive with an FTP server built in would be a server in my book! How does the network drive process the incomming requests without having a central...

John Dulak wrote: mentioned subnetting but give an example using different IP addresses. One IP for the modem and another for the router. This is true, as each device on a network must have another...

Working with a Cisco 871w, relevant part of config posted below. The issue is that wireless clients can't get to each other, but associate and get to the outside without a problem. Firewalls are...