Here's my situation: I work for the state and we have an office that needs to access resources on the city's private network in which they reside. Up till now, (and I didn't know this) they have two...

I have two switches A,and B. Working in load-balance mode. I want to monitor traffic of Port 1 on switch A and also Port 1 on switch B. I want to get this traffic on another port to have my PC...

Ok, I have a 3550. Its running EMI code: c3550-i5q3l2-mz.121-8.EA1c.bin I'm trying to apply some kind of rate-limit for one of my customers to stop them killing our bandwidth. The switch is...

I have a multihomed BGP setup to two different ISPs. It is running on my cisco 3640, which gets the full BGP routing tables. Lately, the router has been having serious memory problems due to the...

SEEKING SENIOR SOLUTIONS CONSULTANT (CallManager) I'm an Executive Recruiter with Riviera Partners and interested in connecting with CCNP's with IP Telephony/IPCC/CIPT and deep CallManager expertise...

We currently use a Cisco 3005 VPN concentrator to allow remote access using the Cisco VPN Client. However, we would like to allow standard out-of-the-box Windows VPN connections (+ others, PDAs,...

We have one Cisco 7206VXR, NPE-400, C7200-I/O-2FE/E, 128M, 48M flash (IOS 12.2(15)T) 2x AC PS available for immediate shipment. $8750 FOB NYC Also, one new-in-sealed-box NPE-G1, standard config...

Dear ng, I'm trying to understand what systems are concerned by Cisco advisories. Consider the case of IOS 12.2(19a): 1. http://www.cisco.com/warp/public/707/cisco-sa-20040616-bgp.shtml 12.2 is...

OK, this is going to be complicated: My config first: Cisco PIX Firewall Version 6.1(3) Cisco PIX Device Manager Version 1.1(2) nameif ethernet0 outside security0 nameif ethernet1 inside...

Hi all, I am using Cisco Access Point 1200 and I found some problems and I hope someone can help me. With using the AiroPeek, although I disabled the broadcast key rotation, the AiroPeek still...

Hi, I inserted an AIM-ATM module in the AIM slot 0 (tried also slot 1...) of a 3745 router witrh 128 MB of RAM and 32 MB of flash. I tried following IOS versions: - c3745-entbase-mz.123-8.T.bin -...

I have a CISCO catalyst 2950 switch running vers 12.1 IOS with MTRJ fibre connections. which is running on a LAN. The network addressing for the PC's is via DHCP. Several PC's (running NT4) have...

We have a Catalyst 4000 2 days ago, after a power outage, the Cat 4000 seemed to be non-operational, so I connected a serial cable to the console port. Having pressed <cr> to log on, it seemed to...

Hello all, We are trying to setup VPN access using Cisco VPN Client 4.0.4b. The installation has been recorded (using setup /r)in Installshield, however the setup always fails without completing the...

Hi, This pix is driving me insane, I need it to use VPN with Cisco Client (3.6.6) and MS L2TP MS L2TP works fine, but the Cisco client connects, but does not receive any encr. packets. The...

Hello I've a such problem with pix501: I can't telnet from less secure network (from my PC:10.16.25.154) to switch (172.16.10.208) on more secure network. But I can connect from more secure network...

Does anybody know if Cisco has a channel bank / h323 solution? Any info would be great. Thanks,

I am trying to decide between a Cisco 3550-12G , Cisco 3550-12T and Cisco 3750-24TSE Any input in this issue would be really appreciated. Thanks

Is there any *working* step-by-step guide out there that can explain the setup of a Cisco ACS "APPLIANCE" so that I can connect to NDS as an external database ? We've recently purchased a Cisco ACS...

When I tftp the Firmware upgrade file cat3000-atm.17-0-0.bin to the Catalyst 3200 to the (ws-x3006) atm card, When the info is being transferred to flash on the switch, I receive this error...