Loaded new OS onto a PIX 520 (pix6.33) and PDM Manager (pdm-302.bin)
All seems fine. A show vers given below all looks good.
Added location command, hostname and domainname
pdm location 10.15.0.150 255.255.255.255 inside
pdm logging informational 100
pdm history enable
hostname pix520ur
domain-name pixpix.com
Added http command for an inside server
http 10.15.0.150 255.255.255.255 inside
Tried https://10.15.0.1 (PIX Inside IP) from IE and get an error about page
canot load. All security tabs are cheked in IE setup
Does the PIX need DES or 3DES license level to work ?
What have I missed. Loging on the PIX shows my https connections accepted
but then nothing.
Thanks
Gary
Cisco PIX Firewall Version 6.3(3)
Cisco PIX Device Manager Version 3.0(2)
Compiled on Wed 13-Aug-03 13:55 by morlee
pixel520ur up 4 hours 55 mins
Hardware: SE440BX2, 128 MB RAM, CPU Pentium II 350 MHz
Flash i28F640J5 @ 0x300, 16MB
BIOS Flash AT29C257 @ 0xfffd8000, 32KB
0: ethernet0: address is 0002.b309.2901, irq 11
1: ethernet1: address is 0002.b309.2862, irq 10
2: ethernet2: address is 00e0.b602.af4a, irq 9
3: ethernet3: address is 00e0.b602.af49, irq 11
4: ethernet4: address is 00e0.b602.af48, irq 15
5: ethernet5: address is 00e0.b602.af47, irq 10
Licensed connections: 65536
Serial Number: 18043400 (0x1135208)
Running Activation Key: 0x69bfeb5d 0x70f288a6 0x06b243ca 0x3c1fdf8c
Configuration last modified by enable_15 at 02:25:43.748 UTC Sat Jan 15 2005
oes the PIX need DES or 3DES license level to work ?