All
I had tried Taiwan "Welltech" fxs, it work fine,
but i had tried other taiwan fxs terinal gw, but won';t work with this
the following is

the debug of q931 of NOT success call


$$ the 12345678 is just a tele number

the dial plan is correct as Wlltech works fine, only other taiwan
gw cannot
## the different is the isdn type one is national, one is
unknown, but the unknown type works fine

What can i do??

2w6d: ISDN Se1/1:23: TX -> SETUP pd = 8 callref = 0x3BA5
2w6d: Bearer Capability i = 0x8890A2
2w6d: Channel ID i = 0xA98397
2w6d: Display i = 0xB1, 'test'
2w6d: Calling Party Number i = 0xA1, '80094235', Plan:ISDN,
Type:National
2w6d: Called Party Number i = 0xA1, '12345678', Plan:ISDN,
Type:National
2w6d: ISDN Se1/1:23: RX <- STATUS pd = 8 callref = 0xBBA5
2w6d: Cause i = 0x82E3 - Information element not implemented
2w6d: Call State i = 0x01
2w6d: ISDN Se1/1:23: RX <- RELEASE_COMP pd = 8 callref = 0xBBA5
2w6d: Cause i = 0x8295 - Call rejected

## the call dropped immediately

the debug of q931 of Success call

2w6d: Called Party Number i = 0x81, '22326617', Plan:ISDN,
Type:Unknown
2w6d: ISDN Se1/1:23: RX <- STATUS pd = 8 callref = 0xBBA6
2w6d: Cause i = 0x82E3 - Information element not implemented
2w6d: Call State i = 0x01
2w6d: ISDN Se1/1:23: RX <- CALL_PROC pd = 8 callref = 0xBBA6
2w6d: Channel ID i = 0xA98397
2w6d: ISDN Se1/1:23: RX <- PROGRESS pd = 8 callref = 0xBBA6
2w6d: Progress Ind i = 0x8288 - In-band info or appropriate now
available
2w6d: Progress Ind i = 0x8281 - Call not end-to-end ISDN, may have
in-band info