I bought a Viewscan G70f flatscreen 17 inch crt monitor recently. Aside from other problems, I cannot get a black point adjustment with the brightness control. Can anyone recommend a good 17 inch crt...

Is there a good URL which shows how to add a TWAIN source to WinXP? I start Irfanview on Windows XP & press File --> Select TWAIN Source, but the results are totally empty (ie there are no TWAIN...

I scanned some of my Kodachrome slides, processed in Germany in 1981, (see http://www.dolman.ca/pics/) and they seem fine. I don't see any of the colour distortions I've heard about. They do seem a...

Alright, so here's the situation. I have a Fujitsi fi-4120C and if I install the driver and run their ScandAll program, I am able to scan just fine. No problems. However, if I install the same driver...

Any opinions about the differences in color between moderately priced Canon vs. Epson scanners?

Recently picked up a Cannoscan FS-4000US film scanner .I did not get any cd with it. Where can I get a copy of the scanning program Filmget . TIA

I have 35mm films (app 50) from my overseas travels, the prints were lost and I want to scan the negs to view my photo's. Are there any other cost effective ways to do it? I purchased a...

Hi, I am a newcomer to photography and trying to figure out if the 35mm film has a linear (like the raw digital format) or gamma corrected image. Do I need to compensate for gamma after scanning the...

Hi there, Does anyone knows if this scanner can be shared on a LAN and used by all the computers in the network? Or, is there any look-alike scanner capable of this? Thanks in advance, -Benton

How can I scan superslides in cardboard mounts without disassembling them? Superslides fit a standard carousel tray and projector but do not fit into the 35mm transparency carrier of my Nikon 4000ED.

I have an epson 1670 scanner. I am trying to scan some old negatives. They were taken with a fotron camera in the 60's. I can't seem to get a decent scan. I have read everything that I can find...

Is anybody familiar with the electronics on this? I switched it on one day, the LED flicked on and then off. I checked the output from the adapter and the voltage had gone high, so it looks...

Hello, About to buy the canoscan 9950 F scanner: I have a concern that the USB port on the laptop I use isn't USB 2 but USB1: 1. is a there a simple way to distinguish between the USB 1 and USB...

I bought this scanner last July during the $50 rebate and have been very happy with it for scanning documents, doing OCR, etc, but I hadn't tried it for scanning film until a few days ago. I'm using...

Hi. I have an Epson Perfection 2400 scanner, but now I'd like to buy a faster one. I mainly use it to scan documents, pages from books etc.; I usually scan at about 240 dpi, monochrome or...

Hi, I am thinking of bying an Epson Perfection 2580 photo for slide scanning and negative scanning for own use. Would this be a good purchase? Thank you in advance! Kind regards /Patrick

I trying to profile my Minolta Scan Multi Pro using one of Wolf Faust's IT8 targets. This works fine in its mount in the 35mm holder both with and without the Scanhancer. I am using 16 bit linear 16x...

Hello All I purchased the DiMage Scan Dual IV slice scanner. I started doing the family slides. Going great until I started doing some slide where the exposed film size was 38mm x 38mm! The scanner...

Works well, or did after I figured out the settings. I found the SilverFast website remarkably unhelpful. Maybe the German version is better. Larry Jones

I replaced my 4870 with a 4990 and it's a big improvement with respect to sharpness and shadow detail. I umgraded the SilverFast software ($99!) and it's good. I'd like to be able to scan several...