Is it the SE or Ai version? If it is SE, make sure to realize it only outputs at 24 bit (vs. 48 bit) in one mode (HDR). Doug -- www.BetterScanning.com - Custom Film Holders and Accessories for...

Hi, Can anyone suggest how do I turn on autocropping in my Brother DCP 120C (MFC series). I am using Scansoft Paperport SE 9.0 that came with the printer. I have scanned auto cropped images before...

Did you disconnect the scanner while reinstalling the sw? Graybeard wrote:

jsam.en...@gmail.com wrote: B&W or color (or a mix)? Of the entire 10x10? And at what resolution? If you own a light table, copy stand and digital camera,

On Feb 21, 8:26 am, saevan...@sbcglobal.net wrote: Saving files in Tiff format is good advice for master files. Jpeg is useful too as long as the file is not going to be resaved. Opening...

On Feb 16, 1:39 pm, Neil <nhmil...@aol.com> wrote: I always save my most important pictures/scanned slides in the .tiff format. Opening a .jpg file, saving it, closing and opening again, etc is...

On Sat, 16 Feb 2008 14:08:41 GMT, Don <lostinspace@123-universe.com> wrote: Don, thanks for the constructive suggestions. I will take all these into account however, I am not (yet) convinced that...

Service for the high-speed scanners can easily cost more than the purchase price of a consumer scanner like the fi-4250. The exchange price for a 5750 will be easily 10 times the $150 for the 4250.

Stefan Krohmer wrote: Hi Stefan, I'm using 8.4.57, but I think this is the same. This procedure is rather indirect and not obvious, but not difficult. It's part of what the manual calls 'Advanced...

On Jan 27, 7:03 pm, Ian Worthington <IanWorthing...@usa.net> wrote: the real selling point of the Plustek Opticbook 3600 is that you can scan up to the edge of a book spine without gettting shadows...

On Feb 11, 9:40*am, soft <s...@ware.com> wrote: The VueScan advanced work flow is typically used to setup VueScan to extract the most useful color data from your scanner. If you already have a jpg...

http://easyurl.net/Scanners

The following post may be of interest ; http://photo.net/bboard/q-and-a-fetch-msg?msg_id=00OPKw

In article <fohjlr$hjv$1@ikaria.belnet.be>, fb <fons.bollens@gep.kuleuven.be> wrote: My Scanjet 4c had the same problem a while ago. First, check the obvious: On DeskScan II under the Tools menu...

"Bill" <billjudyNO@SPAMtelkomsa.net> wrote in message news:FsWdnVB9p4DkSyzanZ2dnUVZ8uqdnZ2d@saix.net... You will be glad you went to USB, especially if you have USB 2.0. Everything is using USB...

"CASE" <case@zensearch.com> wrote in message news:1412f38f-c8aa-413f-baa4-adb1a6fe2832@d4g2000prg.googlegroups.com... Lost of the DPI value. Printing depends on the DPI information to know what...

In article <1202515779.625246@bubbleator.drizzle.com>, jdmnospam@drizzle.com says... I haven't used VS in a while much, but it's somewhere in the batch scan options? A quick paste from Ed's...

MoiMoi wrote: Check that the Canon drivers are loaded and not the Microsoft ones. System properties > Hardware >Device manager. And do a forced driver reload. Add Hardware etc

First of all, the mirror and the front lens of the LS-4000 can be cleaned easily. The mirror is at the front of the optical block. It is held in place by a brass spring clip. The clip can be...

"Happy Traveler" <happy_traveler@abc.net> wrote in message news:FMOdnUmlc9eqZDnanZ2dnUVZ_jydnZ2d@comcast.com... | For what it's worth, several years ago a developing machine at a 'quick | turnaround'...