You have to be sure that the plugin is in the correct folder and then I think you have to check your plugin prefs in Photoshop. I find it very useful for masking the sky and getting dust out. R

"TJ" <Timothy.Fisher@Target.com> wrote in message news:1147851135.445428.160660@j55g2000cwa.googlegroups.com... You should read the Help for Omnipage. Start Omnipage, click on Help on the main...

Maris V. Lidaka Sr. wrote: well, I returned the scanner, received a replacement, did the same scans and got exactly the same results, it has nothing to do with the source flatness or height,...

I have been quiet recently due to heavy workload - the surveying is not as 'easy' as I thought - basically there are a lot of missing benchmarks and I sometimes have to travel quite a distance with...

<ivowel@gmail.com> wrote in message news:1147730140.091686.113310@y43g2000cwc.googlegroups.com... matter. Other that buying a camera that has TIFF as output image. If you set the camera to the...

N Miller wrote: The Epson V700 lid opening is 8.5x11.5 inches and will scan up to 8x10 negatives and transparencies. (been there, done that) Hope this helps, Dave

"Clarence klopfstein" <cklopfstein@gmail.com> wrote in message news:YB0ag.25451$YI5.7860@tornado.ohiordc.rr.com... To be Google/Yahoo friendly you just need the content and text that is about your...

On Sun, 14 May 2006 14:57:49 GMT, "CSM1" <nomoremail@nomail.com> wrote: That's not entirely true. Yes, at some point you need fax hardware (i.e. a modem) but there are a number of sites which can...

On 15 May 2006 01:10:07 -0700, "blumesan" <blumesan@verizon.net> wrote: Weird as it sounds but I can conceive a couple of scenarios where that may occur. Another problem is that when you use a wide...

"hazly" <s_hazly@oritech.com.my> wrote in message news:1147230570.746554.78520@u72g2000cwu.googlegroups.com... Did you get the user guide? I included a link to the...

"Butch Lacadie" <hlacadi1/nospam/@maine.rr.com> wrote in message news:ts29g.13318$Gg.2072@twister.nyroc.rr.com... It is in the Strobe XP 200 Monthly Maintenance Kit for...

On 12 May 2006 08:42:27 -0700, "Scott W" <biphoto@hotmail.com> wrote: Install Virtual PC and then use the old OS.

Ernst, Interesting idea. I assume a "regular" sheet of glass can be used (don't need an antinewton glass), and then shimmed to get the correct plane of focus off the scanner bed? The partial review...

On Thu, 11 May 2006 22:46:25 GMT, Randy Howard <randyhoward@FOOverizonBAR.net> wrote: Oh, I see. That's even worse! I guess even they've lost track of all the different versions... :-/ Don.

Scan your prints on any flatbed - I'm still using an older Epson Perfection 1200. Some sample scans are here: http://www.photo.net/photodb/folder?folder_id=600929 The scanners maximum resolution...

try a new brick if you like the scanner. Or the brick could be overloaded from a high current demand in the scanner - then replace the scanner. An amp meter would tell you quickly enough which side...

*degrub* wrote: :: make sure you delete all folders under TWAIN, TWAIN32, TWUNK, etc that :: pertain to your scanner. uninstall your scanner software. reboot with :: the scanner not attached, and...

On 2006-04-27 17:47:40 -0700, "Sniper" <snipernest@gmail.com> said: There are software methods of dust reduction, but these tend to soften your image, not get everything, and often leave artifacts....

On 7 May 2006 22:28:55 -0700, "blumesan" <blumesan@verizon.net> wrote: I had forgotten about the Nikon Color Management. That I have turned off. After doing that the learning curve was not nearly...

Well, this won't asnwer your question about Nikon Scan, but it is very easy to load an ICC profile using VueScan. If you can get the Coolscan to appear in the list of the Windows Control Panel,...