<snip> "closed session" = cannot put anymore files on the CD "leave session open" + more files can be added at a later date (sometimes older CDROMS have trouble with these) Packet writing software...

"Mikey" <Not_Here@Not_There_Either.nope> wrote Actually I would not worry too much about the bite from a platypus but if it's a male you do need to watch out for the venomous spurs on the hind...

This is 25th November 2005, nearly 4 years into your future, according to your date. ....Alan -- Alan Edwards, MS MVP Windows - Internet Explorer http://dts-l.org/index.html On Tue, 1 Jan 2002...

"Jon_Hildrum" <Jon_Hildrum@amsn.com> wrote: Yes, BUT....any computer running Win95 is extremely likely to be so old and lacking in processor speed, RAM, disk space, etc, that WinXP would not work...

"Alan Edwards" <edwards@southcom.com.au> wrote in message news:u3ucn1du0j41pr3fqvc45us210npco7t9h@4ax.com... Alan Thanks for that; I had forgotten to refresh my newsgroups in OE. 8-( Taken...

try to unmount your drive,fdisk should be on your original boot disk.when using fdisk,also try to DELETE all partions,on the logical drives,also the main one,after the drives are all deleted,you will...

"RobLesley" <RobLesley@discussions.microsoft.com> wrote in...

Moses wrote: Moses, Yes, I'm very happy with Win XP as well, which I use for most of my power applications. I run my business on Win95, because, believe it or now, I still prefer the simple user...

It basiccally depends on what size your mainboard can handle, and even if it can't you can use overlay drivers, to get the full capacity I've hooked up an 80 Gb Hard Drive running Windows 95B, with...

"Gary W. Boley" wrote: My 10-year Gateway 90MHz desktop with Win95a has been running for years on an HP 722C inkjet printer with no problem. Because I use a DOS inventory/invoice program, it seems...

Well - having said that it works - it doesn't. Defaults now go where I want them (when saving) but the icon on the desktop was still pointing to the original folder. I tried dragging as you...

It Will Work… If you do as I have done! Just Do It! follow the 4 steps… $6.00 to $15,000.00 in 30 days! Steps: Follow the Logic, Just Do it and It will work… $$$ in 4 easy steps… 1. Set Up a Free...

Thanks Ben--your referral to Russell Smith's page did the trick!! "Ben Myers" wrote:

You might want to try this instead of Zone Alarm: http://www.kerio.com/dwn/kpf2-en-win.exe WARNING: Opens right up to a download window. I have not tested this download site but it comes from a...

It Will Work… If you do as I have done! Just Do It! follow the 4 steps… $6.00 to $15,000.00 in 30 days! Steps: Follow the Logic, Just Do it and It will work… $$$ in 4 easy steps… 1. Set Up a Free...

Open the case and unplug and reseat the cables that connect the hard drive to the motherboard. Also, make sure the drive is jumpered correctly. Then start the computer, go into the BIOS setup and...

While troubleshooting a friends computer (Compaq Presario 4508) I decided to reload Windows 95. I discovered that the CD drive (Goldstar CRD-8160B) was not being recognized. I was able to load the CD...

"Wylie C" wrote Apart from Command.com, IO.sys, and Msdos.sys (all found in the root of C:\, everything in the DOS folder IS the "full operating system". :-)

Hmm... Well, then the reference I found was mistaken, <s>. Thanks for the correction. -- Gary S. Terhune MS MVP Shell/User "cquirke (MVP Windows shell/user)" <cquirkenews@nospam.mvps.org> wrote...

SORRY! Yours was the first post I read/answered this morning. I got your symptoms exactly backwards! Try removing the mouse in Device Manager, rebooting to allow it to reinstall. If that doesn't...