-- I am not having any luck getting Win 98 SE to identify this board and assign proper resources etc. In fact, the operating system ignores it and gives me a blue screen of death saying I have to...

Product keys do not contain OEM--the Product ID does. I have never had a problem using the procedure I recommended and I have done it numerous times. -- Regards Ron Badour, MS MVP for W98 Tips: ...

"DJW" <ddwr@hotmail.com> wrote in message news:1163950150.164720.126040@m73g2000cwd.googlegroups.com... No. Fdisk modifies the MBR when completing adding or removing a partition. And, creates an...

The standard is either both master and slave devices will have their jumpers set mutually to cable select (slave in the middle of the ribbon cable), OR, master jumpered master and slave jumpered...

Cable Select is a protocol that determines which drive is Master and which is Slave solely by their position on the cable (end or middle connector.) To use Cable Select, you need to have a modern IDE...

You will have to look at the Compaq restore CD and see what is available. At one time, the files were in password protected Zip files and if yours is the same, what you want to do would be...

Spend $6 for a floppy drive and put it in--usually four screws once you open the case. -- Regards Ron Badour, MS MVP for W98 Tips: http://home.satx.rr.com/badour Knowledge Base Info:

No, the email address I use here is just a spam trap.....I don't get anything there. If you need to email me, use: glen.vee @ gmail dot com -- Glen Ventura, MS MVP Shell/User,...

FIXED IT !!! :-) Mostly ;-( Turns out, naturally, I was restoring an early version of Comctl32.dll, which IE6 didn't like, Vn 4.72. Found a later version as a...

Seagate ST3160812AS-RK 160 GB SATA with 137 GB partition. MB drivers from CD and VIA_HyperionPro_V510A. SATA 1&2: Seagate 160 GB. Secondary IDE: Memorex DVD drive. P4 524 – 3.06 GHz. ECS P4M800PRO-M...

look piss off about that...buy a copy and a psp and put windows on the psp.....well beter..right..

Here are some tips about hard drives and/or CD/DVD drives: (These tips are not in order of importance) 1. Make sure your BIOS supports the size of drive you are installing. One time I tried to put...

http://support.microsoft.com/kb/309472 -- Jonny "Netner" <uno@kpnplanet.nl> wrote in message news:454344cf$0$9463$9a622dc7@news.kpnplanet.nl...

Nothing there to uninstall. Many thanks.. will leave it as is and ignore the nag screen when I pull the flash drive.. Art "glee" <glee29@spamindspring.com> wrote in message...

No, actually, since I post in 20-30 or so newsgroups I don't have time to backtrack and find where I posted the reply to the OP. If you're having the same problem why not say so instead of grumping...

I see little point in removing stuff from the registry just on the possibility that it's no longer used or not relevant. However, I would guess that in this case the worst that would happen is that...

On Thu, 26 Oct 2006 00:42:35 +0100, "J. P. Gilliver" <john.gilliver@baesystems.com> wrote: if you missed it: http://www.netradio.no/micro4/Micro20.exe -- Regards , SPAJKY ® mail addr. @ my site @...

Thank you. That solved the problem. Art "glee" <glee29@spamindspring.com> wrote in message news:ubvrlG%239GHA.2340@TK2MSFTNGP05.phx.gbl... If you have TweakUI installed, open Control Panel>...

"Benjamin Dow" wrote: CD and type FORMAT C: /S /U /Q - Copy all the files from the WIN98 directory (approximatly 100 files) into a temporary folder (IE C:\win98). - Reboot the computer to boot off...

On Tue, 24 Oct 2006 23:40:10 +0800, "Herbert Chan" <Herbert@Chan.com> put finger to keyboard and composed: My networking knowledge is very poor, but maybe you could test the status of the network...