- No cable signal in mce
- Posted by firegoose on January 18th, 2006
I have a laptop with mce. I get a signal using the win dvr software and its
really good. I 12 db coming into the house and a split at the main line. I
have a signal amp. after the split coming to the laptop it is a 12db amp with
50-900 mhz. I have a fly tv platninum 35 mini tv tuner card. When i go to
use the tv in mce i get audio but no picture. Its says it has stop capturing
data due to low data rate check the cable signal and reboot comp. and mce.
2 Intel(r) 4 cpu 3.00ghz
3.0ghz, 1.0 gb of ram
ati mobility radeon 9700
fly tv platinum35 mini
It is a multi processor pc
If anybody has ant good ideas i would really appreciate it. The manufacture
of the pc is not being much help. The people at life view that the tv tuner
said i need a specail encoder for mce they only supply the decoding software.
- Posted by bweiler on January 18th, 2006
Unfortunately, the card you purchased doesn't have hardware MPEG encoding
and isn't supported by MCE. Here's the list of supported cards:
http://www.microsoft.com/downloads/d...DisplayLang=en
You may be able to exchange the card you purchased for the FlyTV MCE from
the same company. Here's the link to the FlyTV MCE card:
http://www.lifeview.com.tw/html/prod.../flytv_mce.htm
Hope this helps,
BW
"firegoose" wrote:
> I have a laptop with mce. I get a signal using the win dvr software and its
> really good. I 12 db coming into the house and a split at the main line. I
> have a signal amp. after the split coming to the laptop it is a 12db amp with
> 50-900 mhz. I have a fly tv platninum 35 mini tv tuner card. When i go to
> use the tv in mce i get audio but no picture. Its says it has stop capturing
> data due to low data rate check the cable signal and reboot comp. and mce.
>
> 2 Intel(r) 4 cpu 3.00ghz
> 3.0ghz, 1.0 gb of ram
> ati mobility radeon 9700
> fly tv platinum35 mini
>
> It is a multi processor pc
>
> If anybody has ant good ideas i would really appreciate it. The manufacture
> of the pc is not being much help. The people at life view that the tv tuner
> said i need a specail encoder for mce they only supply the decoding software.
- DTV "no signal message" but 6 bars on signal meter (Windows Media Center Edition) by DonR
- Dual HDTV tuner no signal, singal, signal (Windows Media Center Edition) by James
- Networking: ICS, Cable modem, cross-over cable, NIC??? (Basics) by Michael Horowitz
- Question: Configure sat/cable signal on other than 2,3,4 etc (Windows Media Center Edition) by SLP
- Is my USB cable modem slower then a regular cat5 cable? (Microsoft Windows) by PeterM

